john deere 1025r problems

In the exact same test with all the same variables, the Kubota BX put out 788 pounds of breakout force, and only managed to muster 930 pounds of rollback force. It came out to 394 fewer pounds or 30% less force than the 1025R. When it comes to loader performance, the advantage clearly goes to John Deere.

How much can a 1025R lift in the bucket?

Super Moderator. Depending on configuration, the 1025R/H120 combo is rated for either 836lbs or 955lbs plus the bucket weight.

How fast does a 1025R go?

One must remember that a 1025R with loader weighs somewhere around 2000 lbs, whereas the 4066R/loader/wheel weights will weigh around 6000#. Therefore it weighs about 3 times as much as the 1025R and 20 MPH is plenty fast enough for it and 9 MPH is plenty fast enough for the 1025R.

Whats the difference between a John Deere 1025R and a 1026R?

The 1025R hosts a three-cylinder Yanmar® TNV Series diesel engine that provides 24.2 gross engine power and 18 PTO horsepower. On the other hand, the 1026R provides operators with 25.2 horsepower. Both engines were designed with performance and durability at top of mind.

How much can 1025R lift with pallet forks?

These ultra lightweight pallet forks are the best option for the John Deere 1025r subcompact tractor. You can buy these from Good Works Tractors! Equipped with 36″ tines, these pallet forks weigh only 190 pounds and will outlift the capacity of your loader at 900 pounds at a 21″ load center!

How much weight can a 1025R 3 point hitch lift?

JD says the 1025’s 3ph lift capacity at 24″ is ~650lbs. I’ve seen many posts with ballast boxes (concrete filled, etc.) weighing over that, some significantly.

What size trailer do I need for a 1025R?

We use an 18′ aluminum car hauler for moving our 1025R FILB & 3038E. Definitely would not want something smaller than 16′ with the 1025R. Extra length is a big plus for getting the right weight distribution with varying attachments being hauled. Definitely get brakes on both axles and a decent brake controller.

Is the 1025R 4 wheel drive?

Standard on the John Deere 1025R is 4WD and power steering. This combination allows operators to easily maneuver through any space to have more productive days on the property.

Where is John Deere 1025R manufactured?

The 1025R is designed and manufactured in Deere’s state-of-the-art factory located in Augusta, Ga., though still powered by a Yanmar diesel. And that is a good thing.

Is the John Deere 2025R better than the 1025R?

The Differences

Tire size – The 2025R comes equipped with larger tires than the 1025R which offers greater ground clearance and the option to add more tire ballast for increased stability. Weight – The 1025R weighs in at 1444 lb and the 2025R is 1793.4 lb, making the 2025R approximately 15% heavier.

How tall is John Deere 1025R with cab?

Cab height: 1525 mm (60 in.) Overall height when installed: 1990 mm (78.4 in.) Overall height when installed to top of beacon: 2159 mm (85 in.) Overall width with cab installed: same as tractor width.