deck fascia

On a deck, fascia serves a primarily aesthetic purpose. It partially conceals the joists under your deck from view and creates a polished, finished look. It can also add visual contrast if you use a different paint or stain than you applied to the deck itself.

What can you use for deck fascia?

If you choose to add fascia, any kind of pressure-treated or otherwise rot-resistant lumber can be used. However, if you’ve opted for synthetic decking in one of the many colors available, you’ll want to consider using a complementary PVC fascia. PVC fascia typically comes in 1/2-in. x 11-3/4-in.

Can you use deck boards as fascia?

Another option is to use two deck boards as fascia. Customers often chose this option if they want to match an exact color to their decking, border, or railing.

Should deck boards overhang fascia?

A one to two inch overhang beyond the outer fascia board is sufficient. This means the installed deck boards should have at least 1.75 to 2.75” overhang before the fascia is installed.

How do you cover the sides of a deck?

7 Creative and Functional Deck Skirting Ideas
Wood Lattice. When you imagine a deck skirt, a wooden lattice is probably the first thing that comes to your mind. Solid Wood. Solid wood boards are another popular deck skirting option that’s easy to customize. Composite. Faux Stone. Brick. Shrubs and Plants. Metal.

What kind of wood do you use for deck fascia?

Wood Is a Common Fascia Material

Cedar is a popular fascia wood and redwood is another. That’s because both of these wood species have some natural rot-resistance, even when unpainted. If you prime and paint the fascia, you can also make them out of fir, spruce or pine, which are all less expensive.

Can I use Trex decking as fascia?

Trex offers matching fascia for every decking color in addition to Universal White fascia to complement any project.

What is the best material for fascia boards?

Typically for fascia boards, cedar and redwood are popular choices given their resistance to rot from excessive moisture. However, if you prime and paint the fascia, then fir, spruce, and pine can also make beautiful choices from a design standpoint.

How do you replace outdoor fascia?

How To Replace Roof Fascia Board
Step One: Inspect the Existing Fascia. Step Two: Remove Gutters and Drip Edge. Step Three: Remove Existing Fascia Board. Step Four: Measure and Cut. Step Five: Cover the Seams. Step Six: Seal the Wood. Step Seven: Install Drip Edges and Gutters.

What is deck skirting?

Skirting a deck. A beautifully built deck can be enhanced by a single feature that will add appeal and function by enclosing the underside of a deck with decking material or custom screening. This particular detail is called skirting.

How far should decking hangover?

The decking should overhang the joists between ¼ and 2 inches beyond the end joists and rim board. The amount of overhang you should leave depends on your deck board materials: Most wood decks: ¼” to 1 ¾”

How far should deck boards hang over?

Once installed, the first board should overhang the front of the deck framing by approximately 1 1/2″ (38 mm) and about 3″ (76 mm) on each side. Screw the first deck board in place. Don’t worry about the 3″ overhang on each side.

How much overhang should a 5 4 deck board have?

The edge of decking should never overhang more than one-third of the decking material. For your standard 5.5” decking, that is 1 ¾” overhang.